Optimal Phase Shift Control to Minimize Reactive Power for a Dual Active Bridge DC DC Converter

Optimal Phase Shift Control to Minimize Reactive Power for a Dual Active Bridge DC DC Converter

Abstract:

In a dual active bridge (DAB) dc-dc converter, modulating the phase-shift ratios can suppress reactive power and increase the efficiency under non-unity voltage gain conditions. Derivation of the optimal phase-shift ratios to achieve the minimum reactive power is challenging because a DAB can operate in four different scenarios (forward/backward, buck/boost) and each scenario has five operating modes. This paper first introduces a transformation in which different DAB operating scenarios (forward/backward, buck/boost) can be equivalent to one another; then optimization of only one scenario (forward/buck) is required. Next, for the five modes in forward/buck scenario, based on a graphical method, this paper proves that each operating point of Modes 1, 2, and 5 can be mapped into that of Mode 3 with lower conduction losses, and only two modes require detailed analysis. The optimization process of these two modes are derived step-by-step. Global optimal phase-shift signals that minimize the reactive power under four different DAB operating scenarios (forward/backward, buck/boost) are presented. A simple table and control block diagram are presented for practical implementation of global reactive-power minimization control. Experimental comparison with other modulation schemes verifies the efficiency improvement of the proposed control method.